Photonfocus, A1312, 1″, 1312 x 1082, 3000fps, GigE
The CMOS camera MV1-D1312-3D02-160-G2 was developed for laser triangulation of highly reflective materials. The Photonfocus CMOS sensor A1312 with a full well capacity (FWC) of 90 ke– optimized for high dynamic range applications and a high signal to noise ratio (SNR) was combined with a robust algorithm for line determination. 研制的CMOS摄像机MV1-D1312-3D02-160-G2用于高反射材料的激光三角测量。采用全井容量(FWC) 90克的光电聚焦CMOS传感器A1312，对高动态范围的应用进行了优化，并将高信噪比(信噪比)与鲁棒算法相结合
The laser line detection algorithm is able to compute the peak position of a laser line with sub-pixel accuracy. Thus, the height profile of an object gets computed within the camera, making additional calculations in the PC needless.激光线检测算法能够计算出具有亚像素精度的激光线的峰值位置。这样，一个物体的高度轮廓就会在相机内得到计算，这使得在PC上的额外计算变得不必要。
3D triangulation rate on different region of interest:
| Resolution | Profiles [fps] |
| 1312 x 1024 | 113 |
| 1312 x 256 | 429 |
| 1312 x 128 | 800 |
| 1312 x 64 | 1407 |
| 1312 x 32 | 3266 |
| 1312 x 20 | 3000 |
| 544 x 16 | 5500 |
| Laser line with LinLog® Technology: | Laser line without LinLog® Technology: |
 |
 |
Typical triangulation setup:
| Sensor: | Photonfocus, A1312 |
| Frame rate: | 3000fps |
| Optical format: | 1″ |
| Sensor Resolution: | 1312 x 1082 |
| Pixel size: | 8μm x 8μm |
| I/O Input: | 2x Opto-isolated 2x RS-422 or HTL Opto-isolated for AB-Trigger |
| I/O Output: | 2x Opto-isolated |
| Dimensions: | 60 x 60 x 51mm³ |