Photonfocus, A1024, 1″, 1024 x 1024, 6750fps, GigE
The CMOS camera MV1-D1024E-3D02-160-G2 was developed for laser triangulation of highly reflective materials. The Photonfocus CMOS sensor A1024B with a full well capacity (FWC) of 200 ke– optimized for high dynamic range applications and a high signal to noise ratio (SNR) was combined with a robust algorithm for line determination. 采用CMOS相机MV1-D1024E-3D02-160-G2进行高反射材料激光三角测量。在高动态范围的应用中，光焦CMOS传感器A1024B的全容量(FWC)为200克，高信噪比(信噪比)与鲁棒算法相结合。
The laser line detection algorithm is able to compute the peak position of a laser line with sub-pixel accuracy. Thus, the height profile of an object gets computed within the camera, making additional calculations in the PC needless.激光线检测算法能够计算出具有亚像素精度的激光线的峰值位置。因此，一个对象的高度轮廓在相机内得到计算，在PC上进行额外的计算。
3D triangulation rate on different region of interest:
| Resolution | Profiles [fps] |
| 1024 x 1024 | 150 |
| 1024 x 256 | 590 |
| 1024 x 128 | 1170 |
| 1024 x 64 | 2300 |
| 1024 x 32 | 4400 |
| 1024 x 20 | 6750 |
| 512 x 16 | 14770 |
| Laser line with LinLog® Technology: | Laser line without LinLog® Technology: |
 |
 |
Typical triangulation setup:
| Sensor: | Photonfocus, A1024 |
| Frame rate: | 6750fps |
| Optical format: | 1″ |
| Sensor Resolution: | 1024 x 1024 |
| Pixel size: | 10.6μm x 10.6μm |
| I/O Input: | 2x Opto-isolated 2x RS-422 or HTL Opto-isolated for AB-Trigger |
| I/O Output: | 2x Opto-isolated |
| Dimensions: | 55 x 55 x 49mm³ |